Mobile sauna on wheels: a mobile option for nature lovers. Business idea: how to make big money by building a sauna on wheels Converting a car booth into a sauna

Far from civilization, it can be difficult to perform basic hygiene procedures. In such a situation, a vehicle on wheels comes to the rescue, as it can drive to any point, covering a considerable distance. We suggest you understand the features of such objects, their varieties and the procedure for self-production.

Read in the article

Areas of application for saunas on wheels

Despite the large number of stationary objects, those who want to buy on wheels are:

enjoys fishing;
spends a lot of time hunting;
loves to travel;
lives permanently in the city, loves a bathhouse, but does not have one;
wants to earn money.

The scope of use is much wider. Every steam lover can take advantage of this opportunity and visit a sauna on wheels.

Mobile sauna on wheels: advantages and disadvantages

An outdoor bathhouse has a number of advantages. She:

The disadvantages include the inability to place a water tank. As a result, water for washing is taken either from the nearest natural source, or carried with them on an additional vehicle. There are also increased demands on the reliability of the structure and on the characteristics of the material used during construction and subsequent finishing.

What is needed to organize a sauna on wheels as a business: important points

The popularity of baths has increased significantly recently. If previously it was exclusively a place where you can wash, now it is considered as a relaxation area. Many people decide to use it to relax in the company of friends and improve their health. Considering on wheels as a business, it is worth knowing that opening your own business is carried out in the following sequence:

the base on which the structure will be located is selected. Most often, the choice is made in favor of the ZIL 131, GAZ 53 and other vehicles that have sufficient reliability and good maneuverability. You can buy a GAZ 66 for a bathhouse on wheels. Featuring good cross-country ability, this equipment will allow you to set up a steam room for 6 people;
A project for the future building is being developed and its layout is being worked out. It is advisable to provide not only a steam room, but also a relaxation room;
activity for the provision of services is registered. Most are issued as individual entrepreneurs. To put it into operation, you will have to prepare a certain package of documents, including permission from the SES, traffic police, and firefighters;
an advertising campaign is carried out;
business starts.

Advice! Draw up a business plan to assess the risks of opening a sauna on wheels.

Bathhouses on wheels, placed on different types of bases, with photo examples

If you decide to become an owner on wheels, photo implemented projects can be used as an idea for subsequent implementation. We invite you to see the mobile buildings erected on various databases.

Sauna on wheels on a trailer for a car

If we are not talking about your own business, you can consider this option. For personal use, a trailer with a sauna on wheels is best suited. When designing it, it is important to take into account the carrying capacity of a passenger car. Additional supports will prevent the structure from swaying during operation.

Such buildings usually include a steam room and a dressing room. Due to their limited carrying capacity, they can only be used near bodies of water. We have prepared photos for you so that you can evaluate what such steam rooms look like.

Mobile sauna on wheels on all-terrain trucks

Having decided to start your own business, you should consider using all-terrain vehicles/trucks as a base. Such a mobile bathhouse on wheels will be able to get to places where other equipment cannot go.

Mobile sauna on wheels on a platform frame

A practical and concise option. Such a mobile sauna on wheels is in demand because it can be loaded and removed as needed.

Mobile sauna on wheels in buses and minibuses

If you need a large steam room and relaxation room, you should consider a bus as a base. Often a mobile bathhouse on wheels is made on the basis of Ikarus. In such a bathhouse, up to 15 people can wash at the same time. It includes:

steam room for 5 – 7 people;
shower;
dressing room;
rest room;
toilet;
kitchenette.

A gazelle bathhouse has a smaller capacity, however, it is still in demand among consumers.

Making a sauna on wheels with your own hands

If you decide to become the owner of a mobile building, we suggest you learn how to make one on wheels yourself. Knowing the sequence of actions and the main stages, you can do everything yourself. In this case, a bathhouse on wheels will fully meet the requirements for it and have suitable characteristics.

Design and layout

Before the assembly of the future structure begins, a project must be developed. You can sketch a sketch by hand or use a special one. The latter option is preferable, as it allows you to estimate the proportions of the future and accurately calculate the required amount of material. We take into account the price of the materials for the bathhouse on wheels that are to be purchased. At the design stage the following is calculated:

total weight of the structure;

required power.

A comment

Team leader of the repair and construction company "Dom Premium"

Ask a Question

" When designing, special attention should be paid to the center of gravity to avoid the building from collapsing during transportation. As a counterweight to the stove and shelf, you can use a step and a floor grate.

A photo of a do-it-yourself kung bath can be used as a basis when planning the interior space.

Frame assembly

To assemble a bathhouse on a trailer or frame with your own hands, you should follow the following sequence of steps.

Illustration	Description of action
	All elements of the future design are cut to size. All wood is treated with special compounds to prevent premature rotting. For external ones, you should use a composition that allows you to protect the wood from precipitation, and for internal ones - from steam.
	We start by assembling the blank wall and with. The boards should be placed vertically, and the power jumpers horizontally. The jumpers should be cut before assembly.
	We install furniture ties at the ends of the formed circles to increase the rigidity of the structure. We form holes.
	We install the door. We install the platbands while the ends are in a horizontal position.
	We collect all the elements into a single structure.

Thermal insulation device

The work must be done to a very high quality. The thickness of the thermal insulation cake should be about 15 cm. The work is carried out in the following sequence:

the sheathing is installed;
vapor barrier and mineral wool are installed;
foil is attached;
all foil taps are carefully taped;
a counter-lattice is installed, to which the facing material will be attached in the future.

Stove installation

The firebox should be placed outside. This will make the structure safer and allow for more efficient management of the internal space. It is preferable with a tank for water or a heater, for which a platform has been previously equipped. The mobile steam room can be heated up to +60°C. In stones used to generate steam, it is worth drilling holes and connecting them with wire. This will prevent an accidental fall when the wheel hits a bump.

Interior decoration

For after completion of thermal insulation work. It is worth giving preference to lining made from alder, aspen or linden. It is acceptable to use ordinary treated boards or block houses. To decorate the dressing room you can use conifers. You can often see tiles on shower walls. In any case, there should be boards on the floor.

Attention! All decorative items and furniture must be securely fixed to prevent them from moving while the car is moving.

External skin

For finishing outer wall You can use high-quality or wood. This will add similarity between the mobile structure and the stationary one. The door should open.

Advice! Carved wooden steps and beautifully decorated windows will make the bathhouse more charming.

Installation of a sauna on wheels at the location

The installation begins by uncoupling the bathhouse on wheels and the car. To ensure sufficient stability of the trailer sauna, a leg-support is fixed, as well as three additional supports. After this, the side is folded back and the ladder is lowered. To install a steam room on the base of a truck or bus, just find a relatively flat area and simply turn off the engine.

In order for the mobile sauna to last as long as possible, you should follow certain recommendations when using it. You should:

separate the time between driving on the road and being in the steam room. This will avoid accidental falls and burns;
disconnect the transport from the bathhouse for the entire period of operation;
design the bathhouse as a vehicle so that there are no difficulties when driving on the road.

Caring for a sauna on wheels

To increase the service life of a building, you should properly care for it:

After each procedure, frames and shelves made of wood should be taken outside and dried. Before natural drying, they should be washed well;
qualitatively dry the interior space. To do this, when heating, you should open the door.

Review of prices per hour of using a sauna on wheels

The price of a barrel sauna on wheels may seem too high to many. Many people refuse to purchase because there is a stationary design. If you want to spend time with friends in nature, then you can simply rent it.

What the price for an hour of a bathhouse on wheels will be will depend on the rental period and the place where it needs to be delivered. On average, for the first 3 hours you will have to pay at least 3,000 rubles per hour. For the fourth and fifth - 2,500 rubles each, for the subsequent ones - 2,000 rubles. After 10 hours the rent will drop to 1,000 rubles/hour. If you decide to buy or order a sauna on wheels, share in the comments which option you preferred and why.

Good day! There was an old GAZ-66 booth with all sorts of rubbish. I decided to make a steam room out of it, dismantled the old insulation (foam plastic), cut off all the rusty floors, and extended it with a corner to 2.20 meters. so that you can stand at full height and take a steam bath on the second bench. I covered it with metal from the street and everything fell into place because I don’t know the procedure for insulation and how to actually insulate it. Please tell me, if I lay the isover (layers?) on the metal, then attach the 8mm plywood (primed?) with self-tapping screws with a drill and a press washer directly to the metal, after which I cover it with penofol A-03 single-sided, and after all the euro paneling is attached through penofol to plywood using self-tapping screws (). I simply have all the listed material in stock. Please correct me if I suddenly want to do something wrong. The bathhouse is planned to be used in the summer.

Best regards, Alexander, Magadan.

Hello, Alexander from sunny Magadan!

Think in the right direction; the desire to build a small bathhouse on the basis of an existing old and somewhat converted “GAZON” booth is quite natural. Moreover, in addition there are also materials.

During last year A couple of times I came across reports in the media about mobile bathhouses made according to the same design as the one you are planning. As for stationary similar baths, they are sometimes found in our vast expanses. They are made, of course, not for big money, but because of the availability of retired automobiles.

The most commonly used vehicles are army kungs, emergency vehicles and grain delivery vans.

The thickness of the insulation layer for such baths is 50 or 100 millimeters. And it depends not so much on how effectively the heat will be retained (for the summer season, both options are quite suitable), but on design features existing booth.

That is, if the width of the frame racks made of a metal profile is about 50 millimeters, then the isover type insulation is placed in one 50 mm layer. It will completely fill the space between the outer and inner walls. Well, if the width of the racks is 100 millimeters, then the isover, as a rule, is laid in two layers of 50, which in total will be the required 100 millimeters.

Shabashniks, as a rule, do not follow these recommendations. Instead, they attach thermal film (in any way, including glue) to the inner metal side of the wall. The smooth outer side of the film is placed against the metal, and the rough side is against the insulation. One roll of film is quite enough, their area reaches almost 70 square meters, and it costs from one and a half to two thousand rubles. Although yours is probably more expensive.

Then, after some time, the fasteners may come off, but the film will still be pressed against the metal by the insulation and will not go anywhere.

And sometimes they don’t put any film at all, anyway, such a bathhouse will be enough for at least a dozen years of operation, or even more.

Of course, you can use plywood (there is no need to transfer soil onto it, extra fumes are not entirely useful), but it is much preferable to use ordinary edged or even unedged boards without wane.

Still, for baths, due to its instability to high temperatures, after a short time it will begin to delaminate. With all the ensuing negatives.

Fastening with self-tapping screws and press washers is a completely normal option, if the thickness of the metal of the racks allows it. If this does not work, then pre-drill holes at the fastening points of a slightly smaller diameter than the diameter of the screws.

And only then do they tighten the screws.

Then you can do everything according to your option - cover it with penofol, or you can just use foil. Next, cover it with clapboard. Although class C is not the best the best option, if there are a large number of knots, and in such low-grade lining there are usually plenty of them, they can fly out after some time due to temperature changes.

The lining is often secured with ordinary galvanized nails without heads. 30-40 millimeters long. Although, if you still choose plywood rather than boards, if the plywood is very dense, thin nails may bend when driven in.

The self-tapping screws used to fasten the lining must be sunk into the wood, otherwise their heads will burn the body at high temperatures, especially in those places that are in the zone of intense contact.

Since the lining is very thin, the self-tapping screws, when heated (a term meaning that the surface of the screw will be lower than the surface of the lining) can split the lining. However, try it, what if everything turns out okay?

Before lining the inside of the steam room with clapboard, it must be dried very well. Very often in steam rooms we observe such a thing - after some, sometimes a long time, the lining dries out and cracks appear. It is not fatal; although foil or penofol will appear from behind the lining, it will still work functionally. Only the aesthetic appearance will be compromised. I don’t say which side the penofol is placed on the lining, otherwise you will be offended.

Since you do not address the question of how your structure will be heated, with a stove or electric heaters, we will remain silent about them. The only thing I would like to remind you is to make sure to make a small window in the wall. It will be very useful later, take my word for it without explanation.

So go ahead, build a sauna or steam room from what you have.

Other questions on the topic of arranging a Russian bathhouse.

The thought of how useful a bathhouse on wheels would be comes to everyone who has to work for weeks away from the simplest blessings of civilization. The opportunity to steam and wash away fatigue would be very useful in outdoor activities, fishing, hunting. In the latter case, an outdoor bathhouse is considered almost an obligatory element of hunting equipment.

Autobath on wheels: advantages

Popular wisdom states that any material can be used to make a steam room, from a tarpaulin awning of a tent to a wooden cabin of an old refrigerator. The main thing is to properly and safely equip the stove with a heater and make high-quality thermal insulation of the room. These are all temporary options. They are not very suitable for a good autobahn on wheels, and are almost never used even by fans of relaxing in a steam room.

Modern mobile bathhouses on wheels differ little in terms of comfort from stationary options. Among the disadvantages, one can cite only a limited amount of space for the washing compartment; it is most often sacrificed in favor of the steam room and dressing room. In all other respects, the autobahn soars and treats no worse than a hospital.

There may be several reasons for building or purchasing a mobile sauna on wheels:

Advice! Opportunity to relax and take a steam bath on a trailer in the evening, after construction work during the day under the summer sun it solves half of everyday problems.

Especially if there is nothing on the site except a pit and a water well, and a team of builders hired to work in an open field will always require acceptable living conditions. For the winter or at the end of the season, a trailer with a sauna can be towed to a parking lot near the house or to a garage, and a car sauna with a steam room can be used even in urban conditions.

Mobile sauna on wheels: types

Of course, there are quite a lot of options for a bathhouse in a car or on a trailer, and they are all very different. There are options for industrially manufactured mobile steam rooms.

In addition to expensive factory assembly, you can buy a homemade bathhouse for GAZ 66 from small companies. There are many models of mobile steam rooms based on residential trailers, kungs, buses, old repair shops and single-axle trailers simply converted into a bathhouse. for a passenger car. Autobaths can vary in price and provide completely different levels of comfort for bathing procedures.

Sauna on a trailer

For regular user The best choice would be an autobahn on a two-axle carriage. In the simplest version, this can be a version of a mobile bathhouse - a trailer on wheels with a two-axle configuration. It is also called trailer for its low ground clearance and good stability. A trailer-mounted bathhouse rarely exceeds 2.5-2.8 m in length and 180 cm in width.

The maximum weight does not exceed 700 kg. The design of the bathhouse trailer uses a cladding made of metal siding under timber or logs. It is impossible to leave OSB or plywood uncovered from the wind; when moving, the oncoming wind flow, and even with rain, very quickly renders the wooden surface unusable.

The advantages of a bathhouse on a trailer include:

Compact, a car with a mobile steam room can drive along any routes and roads, without restrictions;
No permits are needed to convert the carriage into a bathhouse trailer, the main thing is that the axle load and external dimensions do not go beyond the permitted limits;
Low price and the opportunity to build a mobile sauna with your own hands. The average cost for re-equipping a trailer is 40% of the cost of building a stationary version of the steam room.

For your information! For a mobile steam room, it is recommended to use two-axle trailers, since a mobile steam bath turns out to be unstable on one pair of wheels, even if it is attached to a car tow bar.

The most luxurious bathhouses are made on the basis of a trailer or semi-trailer attached to a truck tractor. In essence, this is an ordinary autobath installed on a car platform. The price of a bathhouse measuring 3.4x8 m on a three-axle trailer is 8-9 thousand dollars.

The best mobile saunas are made from full-size travel trailers - trailers and campervans. A simple used trailer of the “Hobby Prestige” type will cost 2-2.5 thousand dollars. For the equipment of the steam room and installation of the stove, another 300-400 dollars, and the mobile autobath will be able to serve for another twenty years.

Bathhouse on the bus

Of course, a new mobile home costs twice as much as any bathhouse. For example, a good Mc Louis 2000 made by Fiat Ducato is estimated at 10-12 thousand dollars, but this is no longer a trailer, but rather a full-fledged bus, equipped with everything necessary for living. You can equip it with a steam room, and the mobile autobath will be able to perform three functions at once:

Moreover, unlike a bulky trailer, the bus bathhouse already has a factory-built toilet, shower, refrigerator, stove with gas cylinder. All that remains is to separate part of the space and convert it into a steam room.

PAZ 3205 buses are being successfully converted into a bathhouse, photo.

Thanks to the use of a domestic base, such a bathhouse costs even less than a trailer or trailer of a similar class, approximately 5-6 thousand dollars.

There is also an autobath based on Ikarus and LIAZ vehicles, but city buses are not suitable for arranging a comfortable steam room. The carriage proportions and heavy metal frame quickly cool down the room.

Bathhouse based on GAZ 66

Of all the existing auto versions of a mobile sauna, a steam room based on a “lawn” is rightly considered one of the best, especially if room comfort and high vehicle cross-country ability are required.

The GAZ 66 sauna on wheels will go over any off-road terrain; in fact, the “lawn” is best suited for conversion into a mobile steam room:

The aluminum kung or booth is insulated with foam plastic; the propulsion system has a built-in industrial voltage electric current generator;
The design of the machine has a built-in diesel heater - a heater that can easily raise it in 10 minutes. steam room temperature to the required 80 o C;
The powerful machine is capable of transporting a trailer with a residential module, a mobile electrical installation or a refrigerator.

According to reviews from fishermen and hunters, instead of SUVs and UAZs, it is the autobath equipped on the GAZ 66 base that is increasingly used for outdoor activities, video

Autobath: design

Couple car models have been in production for a long time. The most important details of the layout - the design of the body or trailer, the optimal location of the sauna, shower and washing compartments, heating stove and heater - have long been successfully tested and honed in practice over many years of operation.

When planning car baths, the following rules are used:

The paired compartment with the stove is located in the “tail” of the car booth or kung, away from the fuel tank;
A water supply and a shower stall are installed in the center of the room;
The wooden body of the bathhouse must be sheathed on the outside with sheet metal.

Wooden saunas burn frequently and quickly; a car sauna, regardless of whether the structure is built on a trailer or on the body of a car, is susceptible to fire much more often than stationary options.

For your information! Wood-burning stoves can only be used for a bathhouse assembled on a two-axle trailer with a steam room area of more than 3.5 m2. In all other cases, the autobath is heated with gas heaters.

Below is a layout option for a five-ton two-axle trailer or on a category “C” vehicle chassis

DIY sauna on wheels

The easiest way to build a small mobile autobath is based on a standard trailer for a passenger car. Building a mobile sauna with your own hands is no more difficult, and in some ways simpler than a regular backyard sauna for two or three people.

Installation of the structure

First of all, you need to choose the right trailer for your future steam room. Of all the models of small trailers, the best autobahn will be made from two-axle designs with 12 or 13-inch wheel sizes.

This choice is dictated by very practical considerations:

Firstly, the autobahn is reduced in overall height. The higher the structure, the greater its windage. When driving, in strong winds, a car that is too high can overturn the car;
Secondly, the bathhouse frame is made only using a frame method from a metal or wooden profile, no timber or log frames;
The sauna stove is used only as a closed type. The firebox doors and chimney pipe must lead to the outer rear wall.

Initially, a bathhouse frame is welded from a corner or square on a trailer. The lower part and floor are reinforced with striped oak boards. The frame of the bathhouse is welded to the trailer side members with a continuous seam.

In the design of the frame, you immediately need to provide a niche for the heater and a cavity for installing a gas cylinder; if the autobath is on an independent trailer, then you will also need a battery.

Typically, a car fuel cylinder is used, suspended from the front wall of the bathhouse so that the gas can be shut off both from the street and indoors.

The frame is covered with OSB boards and mineral wool insulation.

Exterior finishing

After laying the insulation package, the outer surface of the autobath is sheathed with sheet material; you can use waterproof plywood or OSB sheets.

To protect from rain and wind, the box and roof of the bathhouse can be covered with metal profiles in the color of the trailer and the overall building.

If a mobile autobath is used only during the summer season, and is transported along the roads on a trailer no more than two or three times a year, in this case the bathhouse body can be assembled from timber, and after treating with an antiseptic, do not line the box with clapboard or siding.

Interior design

The walls of the steam room and dressing room of the bathhouse are traditionally lined with linden and pine clapboards, respectively. The inside of the autobath can be lined with plastic or plasterboard; it is better to use such material only on the ceiling and floor covering.

In this case, the space around the sauna heater must be lined with vermiculite thermal insulation, and the floor is laid with unpolished porcelain tiles.

Oven for a mobile sauna

A small-sized mobile autobath is heated using three types of heating devices:

You can make a stove for a mobile sauna with your own hands, but it is better to use industrial models, for example, propane heat generators or a long-burning briquette stove. Any gasoline, diesel, or alcohol homemade burners and heaters mean that a wooden sauna on a trailer will burn out in the first year of operation.

Care

The main concerns about the autobahn come down to regular drying and ventilation of the room. Periodically, once a month, it is necessary to check the operation of the chimney, the condition of the stove parts, and check the fastening of the box to the carriage.

Before the start of the season, the autobahn is inspected, the wooden cladding parts are necessarily impregnated with fire-retardant and antiseptic compounds.

Documentation

Most often, a car bath on a trailer is not documented with any documents indicating that the structure has been altered. Companies that produce mobile steam rooms indicate in the documents for the trailer information about the presence of an easily removable rigid awning of the frame system.

The situation is more complicated if the autobahn is converted from an old bus or car. In this case, the law requires changes to the description vehicle. Now, according to the documents, the autobahn is listed as a mobile residential building. If during the alteration the windows were not cut out, the power elements of the body, truck, or chassis were not changed, then perhaps the car will not need to be re-registered.

Conclusion

Bathhouses on wheels look like an ideal solution in a situation where you have to live on the move, regularly move and work in the field. A mobile autobath is necessary for summer residents, fishermen, farmers and construction crews working far from civilization. In such a situation, there is no real alternative to a mobile bathhouse.

What could be better than relaxing with friends on a fishing trip and a sauna right on the river bank? Recently, this seemed completely impossible, but recently in Russia a mobile bathhouse and sauna on wheels has become common.

You can find mobile steam rooms on wheels in many major cities, but the price per hour is 800-1000 rubles per hour. In this article we will tell you how you can make a mobile steam room, which you can use both at home and on a hike, or rent it out.

Design

Select a base for construction, draw a drawing and calculate the load on the wheels, the total weight and power of the stove. Another important factor to consider is the center of gravity. It should not be so that all the weight is concentrated on one side, otherwise the car will easily roll over.

Converting a car booth into a bathhouse

Even old cars can be used as a basis for a car bath. The most popular are Soviet army vehicles with kung - GAZ 66 or ZIL 131, they have high cross-country ability, but high consumption fuel. Mobile saunas are also made on the basis of ordinary trailers for cars.

The kung has a large area, so its capacity can reach up to 6 people. Additional insulation will allow it to be used all year round. The photo shows examples of a mobile room, a dressing room, a changing room, a lounger, a folding table and a bench.

For an ordinary wood stove it is small. If you order this option from specialists, then turnkey conversion will cost you at least 140 thousand rubles.

In terms of performance, mobile bathhouses built on the basis of the GAZ 66 will not differ much from the classic types: on average, the transported volume of water is 700 liters, and the supply of firewood is enough for a whole day of heating. This is enough for 15-20 people to relax, so many people began to open a similar business.

Furnace installation

For convenience and space saving, the firebox goes outside.

The surface around the stove inside and outside must be finished with non-flammable, heat-resistant material.

Advice!
To prevent them from accidentally falling out while driving, they can be sewn into beads with wire in advance.
Since their weight can reach 300 kg, to reduce the load they can be completely removed while driving into another car.

Exterior decoration of the bath

To get a beautiful appearance, the outside of the wall can be finished with a house block.
It is better not to make windows, as a lot of heat will be lost through them. If you decide to make windows, try to reduce their area and use 3-layer double-glazed windows with glass at least 6 mm thick.
The door should open outwards.
To save space, the woodcutter and water containers are mounted externally in boxes under the bottom of the kung.

Interior decoration

Inside, the walls are insulated exactly the same as in a regular sauna.

Instructions for interior wall decoration:

A sheathing of antiseptic-impregnated bars is attached to the walls every 60 cm. In kungs they are attached directly to the walls, and in trailers a metal welded frame is first made and sheathed with wood.
The first layer of waterproofing is attached. To do this, you can use a vapor barrier membrane, for example Izospan. On the one hand, it will not allow moisture to pass through, and on the other, it will remove steam, preventing it from accumulating inside.
Then, mineral wool insulation is placed tightly together in the cells of the frame. Additionally, it is recommended to attach it to the walls using umbrella dowels.
The top of the insulation is covered with the same vapor barrier. Heat-reflecting aluminum foil can also be used instead. The insulation joints must be taped with aluminum tape.
To maintain a ventilation gap under the sheathing, an additional counter-lattice 2-3 cm thick is screwed onto the bars.
Then the frame is covered with clapboard or block house.
Particular attention should be paid to securing furniture and the stove so that they are securely fixed while moving.
To save space, you can use folding shelves, folding tables and benches.
Lighting is done from a 12-volt car battery, or a separate 220-volt generator is used.

Note!
For lighting, you need to use moisture-proof and heat-proof lamps, and the wiring must be heat-resistant.
Ordinary wires cannot withstand temperatures above 50 degrees, but in a bathhouse it can exceed 150 degrees in some areas.

Conclusion

The correct thermal insulation cake will take you 15-20 cm from each wall. This is the only way you can warm up the temperature in the bathhouse to 80-90 degrees in just an hour. At the same time, you can start heating the stove while it is still on the move, so that it has time to warm up the bathhouse before arrival. Having made such a mobile sauna with your own hands, you can take a steam bath right on the shore of the lake, in a deep forest, or even in the city center.

The video in this article will show you how a sauna on wheels was made from an ordinary groove.