Improvement of the city, wood works, arrangement of pile foundations and pipelines. Improvement of the city, woodworking, installation of pile foundations and pipelines The main units of machine tools

Machine "SR6-9"

The SR6-9 machine is designed for planing boards, bars, boards to a given size in thickness. Rigid, cast box-type frame dampens vibration well and is closed from above with a sound-absorbing casing with an exhauster funnel.

Workpiece dimensions, mm

Machine "TsPA-40"

The machine is designed for cross cutting boards, beams and shields from coniferous and hardwood. A machine with a solid cast frame, which is simultaneously a hydraulic tank, with a support moving along steel guides, a hydraulic cylinder and with a separate electrical cabinet. Stepless adjustment of the plate movement speed allows the operator to trim at an angle of 45°. The machine is controlled from a separate push-button panel, located in a convenient place for maintenance. Sub-assembly provides maximum convenience in maintenance and machine repairs.

Dimensions of processed material, not more than, mm:

Machine "PARK-7"

Designed for four-sided planing in size according to the thickness and width of the parquet frieze and profiling the longitudinal edges of piece parquet. It can be used to process various bar details.

Machine "PARK-8"

Designed for processing the end sides of the parquet frieze with the formation of a groove on one end and a ridge on the other.

The dimensions of the processed workpieces in length.

Technical characteristics of the TsPA-40 trimming machine

The TsPA-40 cross-cutting machine is simple in design and reliable in operation, provided that all the requirements set forth in this manual are met.

On the frame - a hollow cast iron casting, which is also an oil reservoir, a caliper support body is mounted. The body together with the caliper, if necessary, can be raised and rotated by a certain amount. The caliper rests on rolling bearings and performs reciprocating movements by means of a hydraulic drive. An electric motor with a cutting tool on the shaft is mounted in the head part of the caliper.

The machine is controlled remotely by means of a pedal

Functional features jointer and planer Zenitech FS 400:

• The jointing and planing machine is designed for processing wood materials of any hardness
• This equipment is a machine that combines all the advantages of both planing and planer
• The machine has a long, carefully ground table
• The cutting block has four knives, and the processed surface of most wood species is of high quality, without waviness.
• Knives are installed and adjusted using a special clamping device
• The workmanship is very high, the machine will serve as an excellent addition to any woodworking workshop.
• Cast iron solid construction provides high reliability of the machine during long-term work
• Massive box-shaped bed allows you to significantly reduce the level of vibrations
• Cast tables and four-knife shaft provide better processing and make it easier to install knives on the shaft
• All-metal ruler can be set to the desired angle in the vertical plane up to 45 o

Technical characteristics of the planer Zenitech FS 400:

Universal circular saw Ts-6-2K

The universal circular saw Ts-6 (Fig. 1) is designed for longitudinal and transverse sawing of boards, bars and shields. The machine bed is cast, box-shaped. Inside it, on two interconnected plates hinged to the frame, the saw shaft and the electric motor are mounted in bearings. The electric motor and the saw shaft are kinematically connected to each other by a V-belt transmission.

The position of the saw shaft and the electric motor in the vertical plane can be changed with the handwheel 6, which is connected by a screw to a nut fixed to the top plate. The tension of the belts is carried out by adjusting the length of the rod connecting the plates.

The table has a hole for a saw and a longitudinal groove in which a movable stop square can slide.

Specifications circular saw Ts6-2(K)

Machine CPA-40 designed for cross cutting boards, beams and shields made of coniferous and hardwood.

Machine CPA-40 with a one-piece cast bed, which is simultaneously a hydraulic tank, with a support moving along steel guides, a hydraulic cylinder and with a separate electrical cabinet.

Infinitely variable saw travel speed allows the operator to trim at an angle of 45°. The machine is controlled from a separate push-button panel, located in a convenient place for maintenance. The sub-assembly provides maximum convenience in maintenance and repair of the machine.

Technical characteristics of TsPA-40:

Item 3784:

Year of issue: 1974.

Country of origin: Russia.

Price on request.

Item 5631:

Condition: very good, working.
Country of origin: Russia.
Location: Tver region.
Price on request.

Position 7764:

Condition: very good, working.
Country of origin: Russia.
Location: Tver region.
Price on request.

Item 9665:

Condition: very good, working.
Country of origin: Russia.
Location: Kirov region.
Price on request.

Please note: we sell and buy used machines. Not only the listed equipment is available, but also much more. For more information please contact.

 29.04.2018

 Administrator Chief

The manufacturer of the TsPA-40 circular saw is the Ussuriysk Machine-Building Plant.

Enterprise CJSC Ussuriysky machine building plant ceased to exist in 2014.

The linear guide of the saw unit limits the width of the workpiece to its own length only. So, in the TsPA-40 model, the saw support stroke reaches 400 mm. In order for the device to move in one direction - the direction of saw feed, the caliper has several types of rollers. And the shape of the guide itself is quite complicated. It is subject to intense wear, contact and bending loads, as it has a cantilever shape.

TsPA-40 Cross-cutting circular saw with rectilinear movement of the caliper. Purpose, scope

The machine circular saw with a rectilinear movement of the support of the model is designed for transverse sawing of boards, beams and shields, and can also be used for cutting grooves.

The machine is a general purpose equipment for woodworking industries.

The machine has two electric motors:

• Saw blade drive motor 3.2 kW
• 2.2 kW hydraulic pump drive motor

The support rests on rolling bearings and, at the beginning of work, can be manually raised and lowered by means of a handwheel and a gear train. After lifting or lowering the caliper is fixed at a certain height.

During operation, the caliper performs reciprocating movements by means of a hydraulic drive. An electric motor with a cutting disc on the shaft is mounted in the head part of the caliper.

Landing dimensions of the shaft of the TsPA-40 trimming machine

TsPA-40 Location of the components of the trimming machine

List of components of the TsPA-40 trimming machine:

1. Caliper Feed Control Pedal Caliper Raise and Lower Handwheel
2. Height caliper clamp
3. Transport rollers
4. Saw blade protection
5. Circular Saw
6. saw blade shaft
7. Thrust bar
8. caliper
9. Caliper supply hydraulic cylinder
10. caliper support body
11. Machine bed
12. Electric motor - hydraulic pump drive

TsPA-40 Location of trimming machine controls

Kinematic diagram of the TsPA-40 trimming machine

The device and description of the components of the machine

The TsPA-40 cross-cutting machine is simple in design and reliable in operation, provided that all the requirements set forth in this manual are met.

On the frame - a hollow cast iron casting, which is also an oil reservoir, a caliper support body is mounted. The body together with the caliper, if necessary, can be raised and rotated by a certain amount. The caliper rests on rolling bearings and performs reciprocating movements by means of a hydraulic drive. An electric motor with a cutting tool on the shaft is mounted in the head part of the caliper.

The machine is controlled remotely by means of a pedal

Electrical circuit diagram of the TsPA-40 trimming machine

The wiring diagram of the TsPA-40 machine provides remote control electric motors of the machine through a push-button station.

The machine is connected to the mains by turning on the machine B.

The inclusion of electric motors Ml, M2 is carried out by the KnP button using magnetic starters P1 and P2.

The stop of the electric motors is carried out by the KNS button, which breaks the control circuit. The starters P1 and P2 are turned off, while the normally closed auxiliary contact P1 closes, the starter R3 is activated and a direct current is applied to the motor windings Ml - dynamic braking occurs.

After a certain period of time, the electrical circuit is de-energized by means of a time relay - P4.

Video of work No. 1 of the TsPA-40 trimming machine

Video of work No. 2 of the TsPA-40 trimming machine

Hydraulic circuit diagram of the TsPA-40 trimming machine

The hydraulic drive of the machine consists of the following units and mechanisms:

1. Vane pump G12-33
2. spool
3. Safety valve G52-23
4. Caliper feed cylinder
5. control mechanism

During the operation of the machine, the hydraulic drive provides three positions (positions) of the caliper:

• "work stroke"
• "backtrack"
• "stop"

To obtain a working stroke, press the control pedal with your foot. In this case, the spool communicates with the pump both cavities of the cylinder at the same time. Due to the difference in the forces created, the piston moves towards the rod end - the caliper makes a working stroke.

At the end of the working stroke, a special stop (limiter) moves the spool to a position in which the latter communicates the rodless cavity of the cylinder with a drain - the caliper makes a reverse stroke.

Approaching the starting position, the caliper, by means of the idle speed limiter, puts the spool in the middle - neutral position - the drain from the rodless cavity stops, the caliper stops. Oil through the drilling in the spool flows freely to the drain.

To repeat the cycle, press the control pedal again.

Technical characteristics of the TsPA-40 trimming machine