Where to find Arabic numerals in the Word. How to type Roman numerals in Word. Roman numerals on the keyboard in any application

A wonderful system of numbers was invented by the ancient Arabs! Almost everywhere on our planet, various people have been using it quite successfully for several centuries. But Roman numerals have not yet lost their relevance. A non-positional number system from the ancient Romans is used in writing to designate centuries and millennia, ordinal numbers of monarchs and numbers of volumes in encyclopedias, when designating the valence of chemical elements, numbering of dials of wristwatches. But the task of typing Roman numerals on the keyboard for those who have never done this before can cause some difficulties.

At first, it will seem to you that the Roman number system is rather cumbersome and inconvenient, it is difficult to use it to write down specific dates, and read it too. But you will learn to type Roman numerals quickly over time.

How to type Roman numerals on a computer keyboard
You, of course, have a standard keyboard, where the letters of the English alphabet are present, then it will not be difficult to enter Roman numerals into any text. You just need to know which letters correspond to which number.

To quickly type Roman numerals on your keyboard, switch to English. Click on CapsLock to type in capital letters.

Number 1 is a letter I.

Number 2 corresponds to two letters II and so on until three.

Number 5 corresponds to the letter V.

The number 4 in the Roman system is "5-1", so we type IV... When typing, the smaller number is written before the larger one.

Number 6 = 5 + 1, that is VI... When typing, a smaller number is written after a larger one.

Number 10 is X... We do the same with a nine as with a four. 9 = 10 - 1, so we write IX.

The number 50 is denoted in the letter by the letter L... But 40 = 50-10, which means XL.

The number 60 is 50 + 10, which means LX.

Letter WITH- this is a hundred (easy to remember if you associate it with a centner), letter D- 500, letter M- thousand.

If you want to write a complex number, such as 178, for example, then on the right we write a smaller number, on the left a larger one: 178 = 100 + 70 + 8, which means CLXXVIII... If your birthday is in Arabic numbering 06/23/1977, then written in Roman numerals it will look like XXIII.VI.MCMLXXVII.

In some cases, when writing large numbers in Roman numerals, some difficulties may arise. To overcome them successfully, we recommend using one of the Roman to Arabic converters. One of these converters is presented on the site.

By the way, the Roman numeral system has been popular in Europe for over 2 thousand years. Only in the late Middle Ages did the Arabs replace it with the simplified system that we use now. Fortunately, the Roman number system is rare on the Internet.

And in life as well, they are used extremely rarely, but it is necessary to know how they are written. Moreover, they are often found both in textbooks and in literature. And if everyone can write them on paper, then many, if necessary, write them in Word "will not have problems. The article will discuss how to print them in this program.

Using a Latin keyboard layout

We'll start with the easiest way to type Roman numerals in Word - using the Latin keyboard layout. All that an ordinary layman needs to know is the rule for constructing such numbers. The fact is that they are completely similar to Latin ones. For example, the Roman numeral 10 is written as the English letter X, and 5 as V.

All you need to know is how to switch the layout itself. But it's also easy to do. There are two ways. The first one involves using the hotkeys Alt + Shift or Ctrl + Shift (depending on the operating system). The second method involves switching using a special menu on the Windows taskbar. It is located in the lower right corner, and you can see the exact location in the picture below.

You can also mention the third method, which is rarely used. But it should be noted right away that it works only on the eighth and tenth versions of Windows. It consists in pressing the hot keys Win + Space.

Using the symbol table

You can also print Roman numerals in Word in another way. Of course, to some people it may seem ineffective and simply useless, but it's still worth mentioning. It consists in using a special table with symbols, which is in each version of the program. Now an example of use in the 2003 version will be given, but it's worth saying that you can write Roman numerals in Word 2010 in the same way.

While on the main page of the program, you must initially click on the "Insert" button, which is located above the top panel, and select the "Symbols" item in the drop-down menu. As a result, a window will open in which there will be a huge number of characters. You just have to find the necessary ones and click on the "Insert" button.

Using the sign code

Before you insert Roman numerals in Word using the symbol table, you can pay attention to the code of the inserted character. Having memorized it, you can print Roman numerals without entering the table with symbols. Now the codes of the most popular numbers will be given:

V -0056;
X is 0058;
I - 0049;
L 004C;
M-004D;
C - 0043.

Now all that remains is to type the character code in the document and press the Alt + X key combination, after which the desired character will be inserted into the text.

Using CTRL + F9

But what if you simply don’t know how Roman numerals are written or constructed? In this case, you will be helped by an embedded tool in the program that converts Arabic numerals to Roman numerals. By the way, it is quite simple to use it, so it will not cause difficulties for anyone when using it.

Initially, you need to move the cursor to the desired location, press the left mouse button (LMB) and press the key combination Ctrl + F9. After that, curly braces will appear, between which you need to write "(number) \ * Roman". You end up with something like "((number) \ * Roman)". Now, after pressing the F9 key, the specified number will be displayed in Roman numerals.

Hello dear readers. Today we will return to the topic of working with Word again. And today's topic will be about how to put Roman numerals in the Word. We may need them in the numbering of paragraphs in the document, or when writing text to write a century. Roman numerals in the Word can make your document more readable.

Let me remind you that the last time I talked about how it is carried out. If you don't know how, then be sure to read it.

Numbering in the list

The first method where you might need Roman numerals is to create a numbered list. For example, when creating a document with several paragraphs. Let's see how this is done.

To begin with, you can select to write the necessary points, if necessary. Then on the "Home" tab in the "Paragraph" section, select "Numbering Library" and indicate that we need to do this in Roman numerals. See an example.

We write in English

This is one of the easiest ways to insert a Roman number. We can print it ourselves. And for this you need to switch to English. Usually these are ALT + SHIFT key combinations, rarely CTRL + SHIFT.

Now let's remember the spelling of Roman numerals:

1, 2, 3 - I, II, III (letter I, Russian Ш)
4, 5, 6, 7, 8 - IV, V, V, I VII, VII (letter V, Russian M)
9, 10, 11 - IX, X, XII (letter X, Russian H)
50, 100, 500, 1000 - L (d), C (c), D (c), M (b)

That is, the method is very simple - hold down the Shift key and type the number we need (more precisely, Latin letters).

Let Word write itself

The third method is quite tricky, but at the same time, very convenient. And its convenience lies in the fact that we will not need to think about how to correctly type the number in the Roman version. To do this, we will use a special formula in Word.

Let's walk through this method step by step:

We put the cursor in the place we need.
Press the key combination CTRL + F9.
In the curly braces that appear, put equals: (=)
Next, we write the number that we need to convert. I will write the current year: (= 2016)
We put a forward slash \
We put an asterisk * and write ROMAN in English. If we type roman in small, then the roman letters will also be small. Here's my example: (= 2016 \ * ROMAN)
To apply the formula, you need to press the F9 key

If you did everything correctly, then you will have the appropriate signs. See what happened to me.

Insert symbols

Well, the last method. How convenient it is, judge for yourself.

Open the "Insert" tab, find the "Symbols" section and the corresponding "Symbol" item, and in it click on the "Other Symbols" button. Now in the window that opens, you need to find the symbol you need and click on the "Insert" button. And so on until you have inserted all the characters you want.

So we looked at 4 ways to write Roman numerals in Word. Which one seemed the most convenient for you - tell us in the comments. Goodbye to everyone.

Office Word is by far the most popular program for creating and editing text documents. Unlike simpler editors (for example, Notepad or WordPad), Office Word is able to work with documents containing hyperlinks, pictures, forms and other content, and also has just the broadest possibilities of text formatting. And the presence of a special version of the program on mobile devices only expands its audience and adds popularity.

The possibilities of the program are so wide that at one time all kinds of courses for studying the functionality of Word were very common, and many even active users do not know everything that this application can do. For example, the situation is difficult when you need to write Roman numerals in the Word. However, it is very easy to do this, and you don't even need to use any special functions. Difficulty can arise only when it comes to compiling a numbered list, however, here, too, Microsoft specialists have prepared a very easy-to-use function that even an inexperienced user will not be difficult to learn.

Fast navigation through the article

Writing

In order to write Roman numerals, you do not need to install an additional language pack on your computer or use a special font. All you need to do is switch the keyboard language to English in order to be able to write with letters from the Latin alphabet. There are several ways to switch the language:

Press the "Alt" and "Shift" buttons on the keyboard at the same time, or, if this did not work, press the "Ctrl" and "Shift" buttons.
Use the keyboard shortcut "Windows" and "Space".
Left-click on the “RU” icon on the taskbar and select English.

After the English keyboard layout is enabled, all that remains is to start writing Roman numerals using the letters "I", "X" and "V". For example, to write the number "4", use the letters "V" and "I" to get "IV", and to write the number "9" - "IX".

Numbering

To compile a list that would be automatically numbered in Roman numerals, you will need to use Word's numbered list function, but tweak it a bit. To get started, the user just needs to go to the "Home" tab, and in the "Paragraph" block, click on the "Numbering" button, and then start writing the text. Each time you press Enter, the text will wrap to a new line, thereby creating a new list item.

To make the created list numbered in Roman numerals, you need to select the entire text of the list, and then reopen the "Home" tab and the "Paragraph" block. Next to the "Numbering" button, open the drop-down list and select the third option, on the thumbnail of which Roman numbering is drawn. After that, the entire selected list will change its appearance, and at the beginning of each line, instead of 1, 2 or 3, I, II and III, respectively, will be written.

The use of Roman numbers in Word can be a problem for some novice users. Roman designations are still relevant when writing scientific articles, texts on historical topics, to indicate a specific year or period of reign.

We write Roman numerals in Word

In this article, we will consider several options for how you can insert Roman numerals.

We use English

The first most accessible way is to add them using Latin letters. To do this, you need to perform a few simple steps:

Advice! When writing a text of historical content, words unknown to the reader may come across. Look so that the reader understands how to pronounce the word correctly.

Using the formula

If you have difficulties in writing numbers or you do not want to translate characters manually, you can use another interesting method.

There is a built-in formula for inserting numbers into a document:

Pressing Ctrl + F9 at the same time will appear at the cursor location (). Here we insert the formula = number \ * Roman.
For example, we need to write the number 240 in symbols. The formula will look like this (= 240 \ * Roman), then press F9.
Instead of a formula, we get the result. In this case, it will look like CCXL.

By choosing the desired numbering format

The third method is necessary for inserting list items with roman numbering.